Plastic-strain evolution for cyclic loading based on the equations of the field theory of defects

A relation governing the plastic-strain evolution under applied stresses is obtained within the field theory of defects to analyze the specific features of deformation under sign-varying cyclic loading. The effect of the applied stress amplitude, loading frequency, and cycle skewness on the deformation process under uniaxial loading conditions is studied. Specific features of the plastic-strain evolution in a stable deformation process are considered, and the time to failure of the system in an unstable process is determined. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 3, pp. 112–118, May–June, 2006.     

On the relationship between the work of adhesion and the critical shear stress for the onset of flow instabilities

The relationship between the critical shear stress for the onset of flow instabilities and the work of adhesion at the interface has been evaluated experimentally for a series of polyolefins on several steels, brasses, and coated steels. The critical shear stress was considerably affected by the chemical nature of the die. Low-surface-energy materials were found to produce smooth extrudates presumably by inducing slippage at the wall. Steel, tungsten carbide, and brass surfaces promoted sharkskin defect at shear stresses above the first critical shear stress. A linear relationship between the critical shear stress and the work of adhesion was found to be valid for values of work of adhesion smaller than approximately 30 mN/m. This indicates that slippage occurs due to a breakdown of the adhesion at the interface. For values of work of adhesion greater than approximately 30 mN/m a stronger interaction at the interface may induce a cohesive failure at the interface and subsequently, extrudate distortions.     

Bending of elastic plates with a physically nonlinear inclusion

An infinite elastic isotropic plate with an elliptical, physically nonlinear inclusion loaded at infinity by uniformly distributed moments is considered. Surface loads are absent. The problem of the stress-strain state of the plate is solved in a closed form. It is shown that, for reasonably general stress-strain relations for the inclusion, the bending-moment field (and the corresponding curvatures) in the inclusion is homogeneous. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 6, pp. 152–157, November–December, 2006.     

Stabilization of Unstable Limit Cycles in Systems with Limited Controllability: Expanding the Basin of Convergence of OGY-Type Controllers

The underlying geometric structure of the standard OGY control scheme is analyzed. Some of the main mechanisms that under certain conditions lead to failure of the control algorithm are revealed. The limited controllability available in a system is investigated and it is shown that it may lead to serious problems that will significantly enlarge the state space region of failure of the standard OGY controller. A minimal distance algorithm is analyzed and shown to be, for some problems, more advantageous than the standard OGY technique. Nevertheless, for a broad category of problems, the minimal distance scheme is also shown to fail. As a solution for these problems, two new techniques are proposed: the penalized minimal distance and the multi-step OGY-type scheme. The standard OGY and minimal distance algorithms are particular cases of the new techniques proposed. Finally, we give a necessary condition that estimates the region of controllability under the multi-step OGY-type control. We demonstrate a significantly improved basin of convergence for the new multi-step OGY-type algorithm.     

添加聚合物对混合层流场特性影响的实验研究

叙述了适用于粘弹性流体混合层流场的实验装置的设计和研制．采用二维激光多普勒系统对混合层流场进行了测量，得到了平均速度剖面、动量厚度、湍流脉动强度、雷诺应力等一些流场的基本特征量．结果表明，混合层中加入聚合物后流场将有较大的变化，同时也说明本文所研制的实验装置满足实验的要求．     

微重时卧圆柱内静液面方程与数值计算

由力学平衡方程导出了微重时卧圆柱内静液面方程，推出了边界接触角条件，使用Ｒｕｎｇｅ Ｋｕｔａ法在计算机上得出了数值结果，绘出了静液面形状，并对结果进行了分析．     

General solution for interaction of solitary waves including head-on collisions

A general solution of the Boussinesq equation is presented which solves the problem of interaction of any number of right-going and left-going solitary waves. The solution relies on the exact solution of Gardner, Greene, Kruskal, and Miura (1967), and has the same degree of accuracy as that solution, but has a wider scope of application. It is much simpler than, but as accurate as, Hirota's exact solution (1973) of the Boussinesq equation, to which the present solution is compared for the simplest case of two solitary waves in head-on collision.     

基于遗传算法的水轮机振动参数识别

通过对水轮机现场测试数据的频域分析，建立了测点位移响应的参数正模型。并基于遗传算法，建立了在时域内识别结构振动参数的数值方法，采用该方法对水轮机位移响应正模型的待定参数识别进行了研究。计算结果表明，所建立的基于遗传算法的参数识别方法具有良好的稳定性、抗观测噪声能力和较高的识别精度，能够反演出比较符合实际情况的位移响应振动模型。这就为荷载识别、结构优化和预报减震效果等后续工作提供了可靠的实施前提。     

The Vectorial Parameterization of Rotation

The parameterization of rotation is the subject of continuous research and development in many theoretical and applied fields of mechanics, such as rigid body, structural, and multibody dynamics, robotics, spacecraft attitude dynamics, navigation, image processing, and so on. This paper introduces the vectorial parameterization of rotation, a class of parameterization techniques encompassing many formulations independently developed to date for the analysis of rotational motion. The exponential map of rotation, the Rodrigues, Cayley, Gibbs, Wiener, and Milenkovic parameterization all are special cases of the vectorial parameterization. This generalization parameterization sheds additional light on the fundamental properties of these techniques, pointing out the similarities in their formal structure and showing their inter-relationships. Although presented in a compact manner, all of the formulae needed for a complete implementation of the vectorial parameterization of rotation are included in this paper.     

A proposed mechanism for hydrodynamically-controlled onset of significant void in microtubes

Data and analysis have shown that bubble nucleation and ebullition phenomena in microchannels are different than in large channels. The macroscale models and correlations often fail to predict data representing bubble ebullition processes in microchannels. It is hypothesized here that hydrodynamically-controlled onset of significant void in microchannels is due to bubble departure from wall cavities, and the latter process may be controlled by thermocapillary and aerodynamic forces that act on the bubble. Accordingly, the limited available relevant experimental data are semi-analytically modeled, and the soundness of the proposed hypothesis is shown.